Threading
YG-1 Threading tools
YG-1 Threading tools are highly acclaimed of its excellent quality and unique design,
constantly remaining as the No.1 choice.
Maintained by YG-1’s tight quality control Its unique geometry prevents over-feeding
and also thin threading problems, achieving a shorter cycle time and higher productivity.
Coated/Un-coated Multi-Purpose Solid Carbide
Thread Mills
THREAD MILL
Threading Large Diameter
Coated HSS-PM Tap
SYNCHRO TAP
For High Speed Tapping on
Rigid CNC Machine
Multi-Purpose Tap
COMBO TAP
For Multi Purpose Tapping
HSS & HSS-E
YG TAP GENERAL
For Tapping Blind /
Through Holes
HSS-E & HSS-PM
YG TAP STEEL
For Steel Materials
SOLID CARBIDE & HSS-E
YG TAP
HARDENED
For Hardened Steels
HSS-E & HSS-PM
YG TAP INOX
For Stainless Steels
SOLID CARBIDE & HSS-E
YG TAP
CAST IRON
For Cast Iron
HSS-PM
YG TAP ALU
For Aluminum Wrought Alloys
HSS-PM
YG TAP TiNi
For Heat Resistant Super
Alloys and Titanium Alloys
HSS-E & HSS-PM
YG TAP
FORMING
Tapping by Forming Soft
Materials
HSS-E Nut Tapping Machines
NUT TAP
Nut Tapping Machines
HSS-E
SCREW THREAD
INSERT TAPS
Tapping STI Threads of
Soft Materials
HSS & HSS-E
PIPE TAP
Tapping Whitworth
Pipe threads
- Higher cutting speeds and feeds than Tapping
- Much higher productivity and improved thread surface finish
- Multiple functioned – both right and left hand threads, blind & through holes
-
With/without coolant hole
-
Miniature Thread Mill
-
With coolant hole & Chamfer
-
Drill & Thread Mill with Chamfer
- High Speed tap with HSS-PM(Powder Metallurgy) for CNC Machining
- Good coating and surface treatment
-
Spiral Flute
-
Straight Flute
-
Spiral Point
-
Cold Forming
- Engineered design of the flute geometry enables better chip evacuation and prevents chip clogging
- Excellent performance on various work materials (Stainless steels, carbon steels, alloyed steels, tool steels etc.
-
Spiral Flute
-
Spiral Point
- Suitable for Tapping Blind / Through Holes due to Flute Geometry and Excellent Chip Evacuation
-
Spiral Flute
-
Spiral Point
-
Straight Flute
- Suitable for tapping blind holes due to special flute geometry and excellent chip evacuation
- For steel materials and other long chip forming materials
-
Spiral Flute
-
Spiral Point
- Increase tool life than HSS taps due to higher hardness
- For Hardened Steels (HRc50-60)
- Suitable for through hole in faster cutting speed than other taps due to thick web
-
Bright Finish
-
Steam Tempered
-
Nitrided
- Suitable for tapping blind holes due to special flute geometry and excellent chip evacuation.
- For Stainless Steels (Lamellar and irregular chip formation in higher cutting force)
-
Sprial flute
-
Sprial point
- For Cast Iron and high silicon aluminums
- Increased tool life that is longer than HSS taps due to higher hardness.
-
Straight Flute
- For Aluminum Wrought Alloys with large chip gullets to avoid clogging
-
Spiral flute
-
Spiral point
-
Straight flute
- For Heat Resistant Super Alloys and Titanium Alloys
- Applied cutting edge rake angles and thread relief
-
Spiral point
- Suitable for soft materials with at least 8-10% elongation
- The pre-drilling holes are bigger than normal sized holes
-
TiN, Ni, TiAN, and etc.
- For making nuts on machines
- The work pieces can be taken out from shank side
-
Straight Flute
- Tapping STI threads of soft materials
- Wire insert threads are used for increasing fastening strength in soft materials
-
Spiral flute
-
Spiral point
- Serial hand tap set in First and Bottoming.
- Bottoming tap of set has final internal thread dimensions only
- Tapping Whitworth Pipe Thread
-
Spiral Flute
-
Spiral point
-
Spiral Flute
